Electrochemical Characterization and Voltammetric Determination of Benzoyl Derivatives of Phenobarbital Using Glassy Carbon Electrode

The electrochemical behavior of a number of benzoyl barbiturates was studied using a glassy carbon electrode (GCE). The kinetics of the electrode process is determined, the contribution of physical adsorption to the electrochemical process is estimated, and the mechanism of the possible electrochemical reaction is proposed. It is shown that the electrochemical reduction potentials of benzoyl phenobarbital derivatives are determined by the LUMO energies, calculated by the B3LYP 6‐311+G method. It is established that the process is quasi‐reversible, complicated by adverse reactions. The influence of halogen type and its position in the benzoyl residue of the studied substances on the analytical signal is established. The effective values of the dissociation constants of various forms of benzoyl derivatives were calculated using the example of halonal, for which the values 3.16 ? 10^?8 and 6.31 ? 10^?12, respectively, were found.     

A Novel Approach to All-Optical Generation of Ultra-Wideband Signals

Abstract

The generation of ultra-wideband signals in the optical domain is highly desirable for ultra-wideband-over-fiber systems, which has recently become a topic of interest. In this article, a novel and simple approach to achieve all-optical generation of ultra-wideband signals is proposed, which is based on delaying and superimposing optical Gaussian pulses with opposite polarities. The proposed system is capable of generating both ultra-wideband monocycle and doublet pulses, and the polarity of the generated ultra-wideband monocycle pulses can be fast-switched to implement pulse polarity modulation with the required bit pattern. A model to describe the proposed system is developed, and the generation of ultra-wideband signals is demonstrated with simulations and a proof-of-concept experiment.     

Sound transmission from stiffened double laminated composite plates

An analytical model is developed to investigate the sound transmission loss from orthogonally rib-stiffened double laminated composite plates structure under a plane sound wave excitation, in which first order shear deformation theory is presented for laminated composite plates. By using the space harmonic approach and virtual work principle, the sound transmission loss is described analytically. The validity and feasibility of the model are verified by comparing the present theoretical predictions with numerical results published previously. The influences of structure geometrical parameters on sound transmission loss are subsequently presented. Through numerical results, it can be concluded that the proposed analytical model is accurate and simple in solving the vibroacoustic behavior of an orthogonally rib-stiffened double laminated composite plates.     

Interaction of modulated pulses in nonlinear oscillator chains

We formally derive and rigorously justify the modulation equations of lowest order for the interaction of two modulated pulses on a one-dimensional nonlinear oscillator chain. We show that solutions with the initial form of the assumed ansatz preserve this form over time intervals with positive macroscopic length, and we show a bound on the possible shift of the envelope caused by the interaction. Thus, we rigorously justify and quantify the statement that under the given conditions there is almost no interaction of the modulated pulses.     

氮气吹扫和费托合成的脉冲过程以提高α-烯烃的选择性

费托合成可以将煤炭或者生物质气化得到的合成气转化为α-烯烃等重要的化工产品。研究将费托合成和氮气吹扫操作组合成一脉冲过程,在稳定的操作状态下保证费托合成和氮气吹扫交替进行。在传统的费托合成条件下(反应气速为2 000 h^-1,温度为497 K, 压力为 2.0 MPa, 氢碳体积比为2.0)考察了Fe-Co催化剂在脉冲过程中费托合成的活性和选择性。结果表明,N₂吹扫温度和压力分别为517 K和0.2 MPa下的费托合成的C₃烯烷比是未脉冲的相同反应条件下的九倍左右。同时,反应过程中CH₄的选择性和CO的转化率有所下降。在此基础上,通过间歇反应在固定床反应器中进行该脉冲过程,实验结果表明,利用脉冲操作在费托反应中可以获得更高的烯烃选择性。     

过模矩形波导中硅芯片与基模亚毫米波的作用

模拟研究了过模矩形波导WR10中n型硅探测芯片对TE10模亚毫米波的响应。针对过模波导WR10中内置n型硅芯片的亚毫米波探测结构,推导了基模工作时的灵敏度表达式。采用三维电磁场时域有限差分方法,模拟计算了过模波导中300～400GHz频带的TE10模亚毫米波与硅芯片的相互作用,分析了探测结构中电压驻波比和芯片内平均电场随硅芯片参数变化的规律。结果表明,在相同的芯片参数下,过模探测结构并不影响电压驻波比和芯片内平均电场的大小,但两者随频率变化的波动程度增大。在300～400GHz工作频带内,优化得到了性能较优的过模探测结构,其电压驻波比不大于2.75(335～380GHz频带内不大于1.8),线性工作区的相对灵敏度约为0.127kW-1,频率响应的波动范围在±20.5%内,最大承受功率约为0.53kW,响应时间为100ps量级,满足亚毫米波大功率脉冲的直接探测需求。     

Spectral analysis of the flow sound interaction at a bias flow liner

The interaction between the flow field and the sound field is responsible for the sound absorption at perforated acoustic liners with bias flow and has to be investigated contactlessly. Based on the optically measured flow velocity spectrum, an energy analysis was performed. As a result, the generation of broadband flow velocity fluctuations in the shear layer surrounding the bias flow caused by the flow sound interaction has been observed. In addition, the magnitude of this acoustically induced flow velocity oscillation exhibits a correlation with the acoustic dissipation coefficient of the bias flow liner. This supports the assumption that an energy transfer between the flow field and the sound field is responsible for the acoustic damping.     

Energy harvesting through arterial wall deformation: A FEM approach to fluid–structure interactions and magneto-hydrodynamics

Engineers are confronted with the energy demand of active medical implants in patients with increasing life expectancy. Scavenging energy from the patient’s body is envisioned as an alternative to conventional power sources. Joining in this effort towards human-powered implants, we propose an innovative concept that combines the deformation of an artery resulting from the arterial pressure pulse with a transduction mechanism based on magneto-hydrodynamics. To overcome certain limitations of a preliminary analytical study on this topic, we demonstrate here a more accurate model of our generator by implementing a three-dimensional multiphysics finite element method (FEM) simulation combining solid mechanics, fluid mechanics, electric and magnetic fields as well as the corresponding couplings. This simulation is used to optimize the generator with respect to several design parameters. A first validation is obtained by comparing the results of the FEM simulation with those of the analytical approach adopted in our previous study. With an expected overall conversion efficiency of 20% and an average output power of 30 μW, our generator outperforms previous devices based on arterial wall deformation by more than two orders of magnitude. Most importantly, our generator provides sufficient power to supply a cardiac pacemaker.     

Optical pulse shaper with integrated slab waveguide for arbitrary waveform generation using optical gradient force

Integrated optical pulse shaper opens up possibilities for realizing the ultra high-speed and ultra wide-band linear signal processing with compact size and low power consumption. We propose a silicon monolithic integrated optical pulse shaper using optical gradient force, which is based on the eight-path finite impulse response. A cantilever structure is fabricated in one arm of the Mach–Zehnder interferometer（MZI） to act as an amplitude modulator. The phase shift feature of waveguide is analyzed with the optical pump power, and five typical waveforms are demonstrated with the manipulation of optical force. Unlike other pulse shaper schemes based on thermo–optic effect or electro–optic effect, our scheme is based on a new degree of freedom manipulation, i.e., optical force, so no microelectrodes are required on the silicon chip,which can reduce the complexity of fabrication. Besides, the chip structure is suitable for commercial silicon on an insulator（SOI） wafer, which has a top silicon layer of about 220 nm in thickness.     

线缆系统电磁脉冲效应测量系统研制和试验

分析了实验室瞬态X射线产生的系统电磁脉冲(SGEMP)效应测试所面临的技术问题,提出了解决方法、措施以及实验室模拟瞬态X射线的SGEMP模拟试验方法。通过电子屏蔽、电磁屏蔽、光电隔离、信号对称提取等特殊技术处理,解决了SGEMP效应模拟试验方法和测量系统抗X射线、抗电磁辐射等技术问题,并在大型瞬态X射线模拟源上,测出了瞬态X射线辐照时金属腔内线缆的SGEMP效应波形及幅值。